Ecopolymer group

Wastewater disinfection

Water disinfection appears the required stage of water treatment technology.

As the alternative to traditional chlorination method the UV-disinfection which is considered to be the most nonpolluting disinfection method is recently widely applied.

Ecopolymer Group has a long-term introduction experience in water UV-disinfection technology. The company executes the following works:
  • plant preproject process examination;
  • determination of exposure dose, type selection of the device and its supply;
  • engineering and technical support;
  • fulfillment of installation and commissioning works;
  • warranty and post-warranty service.




Depends on wastewater disposal mode frame (forcing) and tray (free-flow) devices are  applied. Challenge of tray systems appliance is determined by wastewater disposal mode being free-flow at the most of sewerage WWTPs.

Modular design of such systems allows to mount the device in free-flow effluent channels and contact tanks and to present water treatment performance from 10 to 100 000 m3/hour.

Continuous automated treatment within the device operation process supports constant supply of specified UV-raying dose without any maintenance personnel lamps monitoring. The monitoring is carried out by the certified calibrated sensors and automatically programmable logic controller.


Automated UV-lamps power control system (within the scope of 50-100%) provides 20-25% power consumption reduction and prolongs lamps working life period.

ECOPOLYMER long-term experience of biologically treated wastewater UV-disinfection system implementation allows them to be recommended for wide application at differently performed WWTPs.